Good to see you
Otherwise login by email.
Welcome to Dulux Professional
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Registration complete
Successfully registered, please login
Delete Account
Dulux Professional Exterior E700
-
UV Fight Chromabrite Technology
-
Algae and Fungus Resistant
-
High Opacity
-
High Coverage
-
No Peeling
-
Smooth Finish
-
Finish Matt
-
Coverage 13-15 m2 /litre/coat
-
Thinning Brush- For application with brush, thinning should not exceed 2-3 parts of clean water to 4 parts of paint (50%-75%) Roller- For roller application thin with up to 0.5 parts of clean water to 4 parts of paint (10-15%)
Product Description
Application Description
Technical & Safety Documentation
Colour Range
Tips & Advice
-
1. Preparing the SurfacesNew or bare surfaces New or bare surfaces must be clean, dry and free from efflorescent salts. Scuff the surface with suitable sandpaper or sandstone to make the plaster surface smooth. Dust off throughly. For best results apply a single coat of Dulux Professional WeatherShield E1000 Primer (refer PDS for correct application procedure). Let the surface to dry for 2-3 hrs. Fill the surface with Dulux Exterior Acrylic Putty (refer to PDS for correct application procedure). Scuff surface with suitable sandpaper & dust off.
Previously painted sound surfaces Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. Treat any area affected by mould, lichens, algae with Dulux Aquashield PreTreatment Coat. Scuff surface with suitable sandpaper and dust off. Powdery, dusty surfaces, cracks & other surface defects Fix minor defects. For large holes and cracks, use sand and cement mixture. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. Treat any area affected by moulds, lichens and algae with Dulux Aquashield PreTreatment Coat. Allow the surface to dry & prepare the surface as described above. -
2. CleaningClean all equipment with clean water immediately after use
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job
Dulux Professional Exterior E700
Save to My Workspace