Dulux Professional WeatherShield Primer E1000

Excellent Adhesion
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Alkali Resistant
  • Reinforces Adhesion and Durability of the End Coat
Technical Information
  • Finish N/A
  • Coverage 16-18 m2 /litre /coat
  • Thinning For sealing new or bare surfaces, thin with up to 2-3 parts of clean water to 4 parts of paint (50%-75%). For application with roller, thinning should not exceed 0.8-1 parts of clean water to 4 parts of paint (20-25%)

Product Description

Dulux Professional WeatherShield Primer E1000 is a high quality exterior acrylic primer that is equipped with crack bridging technology which prevents top coat from hairline cracks. This high quality exterior primer also prevents top coat from peeling, alkali attacks and also provides excellent adhesion between coats.

Application Description

Apply 1 coat of Dulux Professional WeatherShield Primer E1000 and let it dry for 2-3 hours.

Technical & Safety Documentation

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Lift with care – gross weight exceeds 10kg. Wear eye/ hand protection. Do not breathe vapors/spray. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Avoid release to the environment. Collect spillage. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/ user on request.

Tips & Advice

  • 1. Preparing the Surfaces
    New or Bare Surfaces:
    New surfaces must be clean, dry, and free from efflorescent salts. Scuff the surface with suitable abrasive paper or sandstone to make the plaster surface smooth and dust off. Treat any area affected by mould, lichens, algae or moss with Dulux Aquashield PreTreatment Coat. Apply a single coat of Dulux Professional WeatherShield E1000 Primer. Allow the primer to dry for 2-3 hours.

    Previously Painted Surface:
    Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Apply a single coat of Dulux Professional WeatherShield E1000 Primer. Allow the primer to dry for 2-3 hours.

    Powdry, Dusty and Cracked Surfaces:
    Make good minor defects. For larger holes and cracks use sand and cement mixture. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Apply a single coat of Dulux Professional WeatherShield E1000 Primer. Allow the primer to dry for 2-3 hours.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
Fetching the data, please wait...