Dulux Interior Acrylic Emulsion

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Smooth Finish – Superior quality ingredients give the paint superior flow and levelling making the finish really smooth and giving your walls a beautiful look
  • Easy to apply – It can be applied faster with lesser effort due to improved ease of brushability, hence saving time so the paint job can get done
Technical Information
  • Finish Matt
  • Coverage 90 – 110 sft per litre for 2 coats (However, this can vary depending upon surface nature and surface preparation) These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Smoother Finish

Product Description

Dulux Interior Acrylic Emulsion is a premium water-based acrylic emulsion paint with a
smooth matt finish for walls and ceiling and other surfaces like particleboard, fiber insulation
board etc.

Application Description

Surface Preparation

Proper surface preparation is a must to get the desired finish. New concrete/plaster surface should be allowed to mature properly.

Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax, etc. before application.

All surfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off.

Suitable remedial measured should be taken in case of water seepage/leakage problems. Fungus affected areas need separate treatment.

Application Tools

By roller, brush or airless spray (nozzle width between 0.5mm and 0.7mm)


For Brilliant White & Pastel Shades dilute up to 40-45% (400-450 ml of water in 1 litre paint), for deep base shades dilute 25-30% (250-300ml of water in 1 litre paint).

Note: Normally two coats of paint are sufficient for complete opacity & desired finish. Deep base shades may require third coat for getting the desired opacity.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Colour Range

CP5 Colour Palette, Colour Futures TM 2024

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae
    and flaking paint. This can be achieved by brushing with a wire/stiff coir brush followed by
    water jetting if required. Fill up all minor cracks and defects with cement and sand mixture
    in the ratio 1:3. Avoid application of putty or filling compounds while painting an exterior
    surface. Application of one coat of Aquatech Pre-treatment coat is recommended for better
    performance of the paint.
  • 2. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...