Good to see you
Otherwise login by email.
Welcome to Dulux Professional
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Registration complete
Successfully registered, please login
Delete Account
Weathershield E1000
-
Provides effective protection against peeling *based on tests conducted by BSD Singapore and applicable to selected colours.
-
E1000 has preservatives that fight algae and fungus which prevents the formation of black spots and fungal patches.
-
Reflects Infrared rays to reduce exterior wall surface temperature upto 5 degrees celsius
-
All-round protection of the walls
-
Finish Mid Sheen
-
Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity- 45-60 sq ft/L/2coats On textured surface of low porosity- 30-50 sq ft/L/2coats These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
-
All-round protection of the walls
-
Reflects Infrared rays to reduce exterior wall surface temperature upto 5 degrees celsius
-
7-Year Performance Warranty
Product Description
for new or previously painted exterior masonry surfaces.
Application Description
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
Avoid inhalation of dust during cleaning of the surface. For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
Freshly plastered surfaces must be allowed to cure completely. For best adhesion performance, the moisture content in the wall should not exceed 10%.
Application Tools
By roller, brush or conventional / airless spray ( nozzle size 0.5mm to 0.7mm)
Dilution
Dilute 1L of paint with 400-500 ml clean water for brush application. For roller, dilute with 300ml water. In case of deep colours, dilute 1L of paint with a maximum of 250 ml clean water. An additional coat may be required for full opacity.
Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and color.
Technical & Safety Documentation
Colour Range
Tips & Advice
-
1. Preparing the SurfacesEnsure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,
algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed
by water jetting if required. Avoid inhalation of dust during cleaning of the surface. For areas
severely affected by algae or fungus, application of Pre-Treatment Coat is recommended. Fill
up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid
application of putty or filling compound. Freshly plastered surfaces must be allowed to cure
completely. For best adhesion performance, the moisture content in the wall should not
exceed 10%. -
2. StoringObserve label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job
Weathershield E1000
Save to My Workspace