Weathershield UltraClean

High performance exterior emulsion with High DPUR (Dirt Pick-up resistance) specifically designed to protect exterior surfaces from the most challenging weather conditions.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Ultra Clean has preservatives that fight algae and fungus which prevents the formation of black spots and fungal patches.
  • Colour Guard Technology resists shade fading for better and long-lasting protection, along with Best-In-Class whiteness
Technical Information
  • Finish Mid Sheen
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity - 50-65 sq ft/L/2coats On textured surface of low porosity - 35-50 sq ft/L/2coats These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Extremely tough top layer resists to Dirt Pick-Up

Product Description

Dulux Professional Weathershield UltraClean is a high performance exterior emulsion
specifically designed to protect exterior surfaces from the most challenging weather
conditions. Its unique formulation provides superior dirt resistance and provides ultraresistance to the formation of algae and fungus keeping those unsightly black spots away.

Application Description

Surface Preparation

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
Avoid inhalation of dust during cleaning of the surface. For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
Freshly plastered surfaces must be allowed to cure completely. For best adhesion performance, the moisture content in the wall should not exceed 10%.
Application Tools
By roller, brush or conventional / airless spray.

Dilution
Dilute 1L of paint with 300-400 ml clean water for brush application. For roller, dilute with 300ml water. In case of deep colours, dilute 1L of paint with a maximum of 250 ml clean water. An additional coat may be required for full opacity.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and color.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Colour Range

CP5 Colour Palette (Painter) SESA, Colour Futures TM 2024 (Painter) SESA

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,
    algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush,
    followed by water jetting if required. Avoid inhalation of dust during cleaning of the surface.
    For areas severely affected by algae or fungus, application of Pre-Treatment Coat is
    recommended. Fill up all minor cracks and defects with cement and sand mixture in the
    ratio 1:3. Avoid application of putty or filling compound. Freshly plastered surfaces must be
    allowed to cure completely. For best adhesion performance, the moisture content in the wall
    should not exceed 10%.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...