No Colour Selected

Weathershield Prima E900

Select a Colour
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Shade Protection
  • Dirt & Dust Resistance
  • Good Fungal Protection
  • Sun Reflect
Technical Information
  • Finish Mid Sheen
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity- 45-65 sq ft/L/2coats On textured surface of low porosity- 35-50 sq ft/L/2coats These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Resists Dirt
  • Resists Fading
  • Resistant to the levels of atmospheric humidity normally experienced in exterior environments

Product Description

Dulux Professional Weathershield Prima E900 is a smooth emulsion paint with added Silicon to make it
withstand even the harshest weather up to 6 years. Moreover, it resists black spot & fading to make the
buildings look clean and beautiful. It is compliant with the requirements of Bureau of Indian
Standards (IS:5411, Part B) for exterior emulsion paints.

Application Description

Surface Preparation

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
Dry sanding, flame cutting and/or welding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
Avoid inhalation of dust during cleaning of the surface. For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
Freshly plastered surfaces must be allowed to cure completely. For best adhesion performance, the moisture content in the wall should not exceed 10%.
Application Tools

By roller, brush or conventional  / airless spray ( nozzle size 0.5mm to 0.7mm)

Dilution
Dilute 1 litre of paint with 400ml to 500ml clean water. In case of deep colours, dilute 1 litre of paint with a maximum of 250ml. clean water (An additional coat may be required for full opacity) 

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and color.

Technical & Safety Documentation

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and other fumes. Wet sanding/flaming should be used wherever possible. Work in well-ventilated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapor/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright position and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with soap and water or skin cleanser. Do not empty into drains or water course. Safety data shot available or professional user on request Do not use empty container for storing food. Use only in well-ventilated areas & solvents or thinners Lift with care - gross weight may exceed 10 kg
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Download Adobe Reader

Colour Range

[True Joy™] - Colour of the Year 2025, CP5 Colour Palette, Colour Futures TM 2024

Tips & Advice

  • 1. Preparing the Surfaces
    Dry sanding, flame cutting and/or welding of the dry paint film may give rise to dust and/or
    hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be
    avoided by the provision of local exhaust ventilation, suitable respiratory protective
    equipment should be used.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Weathershield Prima E900

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, please wait...