Weathershield Projects

Dulux Weathershield comes with ACTIV Technology for better fungus protection.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Superior resin that resists cracking and peeling
  • Smooth finish that prevents accumulation of dirt
  • Special polymer formulation that locks Anti-Fungal compounds into the paint film
Technical Information
  • Finish Matt
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity - 45-60 sq ft/L/2coats On textured surface of low porosity - 30-50 sq ft/L/2coats These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • ACTIV Technology for better fungus protection
  • Special polymer formulation that locks Anti-Fungal compounds into the paint film
  • Smooth finish that prevents accumulation of dirt
  • Superior resin that resists cracking and peeling

Product Description

Dulux Weathershield Projects is a high quality acrylic based premium emulsion with superior
all weather protection with excellent anti algal & fungal properties and silicon additive.
It is suitable for new or previously painted exterior masonry surfaces such as brick works,
plaster, cement, rendering and semi-permanent exterior surfaces. Dulux Weathershield
Projects is equipped with Colour Lock technology with its unique UV resistance and alkali
resistance, it retains colours for a long period of time. The product withstands atmospheric
weathering for upto 5 years.
Dulux Weathershield Projects is compliant with the requirements of Bureau of Indian
standards (IS 15489:2004) for exterior emulsion paints.

Application Description

Surface Preparation

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.

Avoid inhalation of dust during cleaning of the surface. For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.

Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compounds.

Freshly plastered surfaces must be allowed to cure completely. For best adhesion performance, the moisture content in the wall should not exceed 10%.   

Application Tools

By roller, brush or conventional /airless spray (nozzle size 0.5mm to 0.7mm).

Dilution

Ready to use. Dilute 1L of paint with 300-400 ml of water. In case of dark colors, dilute 1L of paint with a maximum of 250 ml of water. Recommended dilution for roller is 20-30%.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae
    and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by
    water jetting if required. For areas severely affected by algae or fungus, application of ICI
    Pre-Treatment Coat is recommended. Fill up all minor cracks and defects with cement and
    sand mixture in the ratio 1:3. Avoid application of putty or filling compound while painting an
    exterior surface.
  • 2. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...