Diamond A1000 Sheen

Size
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Classic smooth sheen finish with glow of pearl and feel of silk
  • Gives an attractive mid sheen finish that exudes the shimmers and luxury of pearls
Technical Information
  • Finish Sheen Finish
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 10.5-11.5 m 2 /litre.
Product Features
  • Classic smooth sheen finish with glow of pearl and feel of silk
  • Gives an attractive mid sheen finish that exudes the shimmers and luxury of pearls

Product Description

Dulux Professional Diamond A1000 Sheen is a premium quality paint with a
smooth and sophisticated sheen finish. It is specially formulated with Dulux
Colourguard technology that locks in colours to keep your wall looking
beautiful for longer

Technical & Safety Documentation

Colour Range

CP5 Colour Palette (Painter) SESA, Colour Futures TM 2024 (Painter) SESA

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly
    adhering material, dirt, grease or wax. Remove all loose and defective paint or
    powdery residues by thorough brushing and scraping, using a stiff fiber brush.
    Where necessary, wash the surface to remove dirt, grease and powdery or
    dusty residues. Rinse with clean water and allow to dry. Treat any areas
    affected by mould, lichens, algae and moss with Dulux Professional Fungicidal
    Wash. Repair any surface defects with an appropriate filler. Surfaces that
    remain powdery, friable or chalky after thorough preparation should be sealed
    with one coat of an appropriate Sealer (see below System Recommendation).
    Where necessary, rub down and then wipe off with a damp, lint free cloth to
    avoid dust. Do not paint if the wall is saturated with dampness. (Protimeter
    reading higher than 16%). Allow excess moisture to evaporate.
Fetching the data, please wait...