Good to see you
Otherwise login by email.
Welcome to Dulux Professional
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Registration complete
Successfully registered, please login
Delete Account

Diamond Refresh
-
Neutralise formaldehyde and reduces the VOCs in the air – compiles with the JC/T 1074-2008 “Purification Performance test method of coatings On air purification.”
-
Low VOC – compiles with the Singapore Green Labelling and Sirim Eco-Label criteria
-
Superior washability
-
Anti-bacteria – complies to JIS Z2801 Anti-Microbial Test.
-
Mould and Fungus resistant.
-
Excellent alkali resistance and adhesion properties
-
Finish Low Sheen
-
Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 12 m 2 /litre.
-
Drying Time Single coat at standard thickness- Dependent on temperature and humidity 1-2 hours
-
Neutralizes formaldehyde, cuts VOCs – complies with JC/T 1074-2008 air purification standards
-
Low VOC – compiles with the Singapore Green Labelling and Sirim Eco-Label criteria
-
Superior washability
-
Anti-bacteria – complies to JIS Z2801 Anti-Microbial Test.
-
Mould and Fungus resistant.
-
Excellent alkali resistance and adhesion properties
Product Description
anti-formaldehyde paint. It basically neutralizes formaldehyde, a common
indoor air pollutant. It also comes with fungus and mould resistance making it
suitable for all indoor surfaces.
Technical & Safety Documentation
Colour Range
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be sound, clean, dry and free from all defective or poorly
adhering material, dirt, grease or wax. Remove all loose and defective paint or
powdery residues by thorough brushing and scraping, using a stiff fiber brush.
Where necessary, wash the surface to remove dirt, grease and powdery or
dusty residues. Rinse with clean water and allow to dry. Treat any areas
affected by mould, lichens, algae and moss with Dulux Professional Fungicidal
Wash. Repair any surface defects with an appropriate filler. Surfaces that
remain powdery, friable or chalky after thorough preparation should be sealed
with one coat of an appropriate Sealer (see below System Recommendation).
Where necessary, rub down and then wipe off with a damp, lint free cloth to
avoid dust. Do not paint if the wall is saturated with dampness. (Protimeter
reading higher than 16%). Allow excess moisture to evaporate. -
2. CleaningClean all equipment with clean water immediately after use.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job

Diamond Refresh
Save to My Workspace