Diamond Solventbased Sealer A1000

Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Good penetration on powdery surface to reinforce the subsequent finish paint on your interior walls
  • Alkali resistant and efflorescence resistant
  • mproves the opacity of subsequent finish paint
Technical Information
  • Finish Matt
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 8-10 m 2 /litre.
Product Features
  • Good penetration on powdery surface to reinforce the subsequent finish paint
  • Excellent Alkali Resistance
  • Efflorescence resistant
  • Improves the opacity of subsequent finish paint

Product Description

Dulux Professional Diamond Solventbased Sealer A1000 is high performance
alkaline resisting sealer specially formulated for new and existing painted
interior masonry and building board surfaces. It provides excellent adhesion to
the substrate and prepares the surfaces for better topcoat finishing.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly
    adhering material, dirt, grease or wax. Remove all loose and defective paint or
    powdery residues by thorough brushing and scraping, using a stiff fiber brush.
    Where necessary, wash the surface to remove dirt, grease and powdery or
    dusty residues. Rinse with clean water and allow to dry. Treat any areas
    affected by mould, lichens, algae and moss with Dulux Professional Fungicidal
    Wash. Repair any surface defects with an appropriate filler. Surfaces that
    remain powdery, friable or chalky after thorough preparation should be sealed
    with one coat of an appropriate Sealer (see below System Recommendation).
    Where necessary, rub down and then wipe off with a damp, lint free cloth to
    avoid dust. Do not paint if the wall is saturated with dampness. (Protimeter
    reading higher than 16%). Allow excess moisture to evaporate.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner or white spirit immediately after use
Fetching the data, please wait...