Interior Sealer A500

Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  •  Good adhesion
Technical Information
  • Finish Matt
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 10 - 11 m 2 /litre.
Product Features
  • Excellent adhesion property

Product Description

Dulux Professional Interior Sealer A500 is a water-based sealer for interior
masonry surfaces. It provides good adhesion to the substrate and forms an
undercoating for better topcoat finishing

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering
    material, dirt, grease or wax. Remove all loose and defective paint or powdery
    residues by thorough brushing and scraping, using a stiff fiber brush. Where
    necessary, wash the surface to remove dirt, grease and powdery or dusty residues.
    Rinse with clean water and allow to dry. Treat any areas affected by mould,
    lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any
    surface defects with an appropriate filler. Surfaces that remain powdery, friable or
    chalky after thorough preparation should be sealed with one coat of an appropriate
    Sealer (see below System Recommendation). Where necessary, rub down and
    then wipe off with a damp, lint free cloth to avoid dust. Do not paint if the wall is
    saturated with dampness. (Protimeter reading higher than 16%). Allow excess
    moisture to evaporate.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
Fetching the data, please wait...