Interior Washable

Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Anti-bacterial functionality – aids to inhibit growth of bacteria on walls
  • Easy Cleaning – protective paint film making it easy to wipe off common household stains
  • Colourguard: Locks in colour to keep your wall looking beautiful longer
Technical Information
  • Finish Matt
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 11 - 12 m2 /litre.
Product Features
  • Anti-bacteria – complies to JIS Z2801 Anti-Microbial Test.
  • Colourguard technology that locks in colours

Product Description

Dulux Professional Interior Washable is a premium emulsion that keeps the walls
looking cleaner and beautiful for longer period of time. It provides good stain
resistance to allow cleaning common household stains off walls easily. It comes
with anti-bacterial functionality that aids to inhibit growth of bacteria on
walls. Stains are easy to be removed without damaging the paint film. It is
suitable for both new and suitably primed previously painted masonry and
building board surfaces.

Technical & Safety Documentation

Colour Range

CP5 Colour Palette (Painter) SESA, Colour Futures TM 2024 (Painter) SESA

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering
    material, dirt, grease or wax. Remove all loose and defective paint or powdery
    residues by thorough brushing and scraping, using a stiff fiber brush. Where
    necessary, wash the surface to remove dirt, grease and powdery or dusty residues.
    Rinse with clean water and allow to dry. Treat any areas affected by mould, lichens,
    algae and moss with Dulux Professional Fungicidal Wash. Repair any surface
    defects with an appropriate filler. Surfaces that remain powdery, friable or chalky
    after thorough preparation should be sealed with one coat of an appropriate Sealer
    (see below System Recommendation). Where necessary, rub down and then wipe
    off with a damp, lint free cloth to avoid dust. Do not paint if the wall is saturated with
    dampness. (Protimeter reading higher than 16%). Allow excess moisture to
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
Fetching the data, please wait...