Good to see you
Otherwise login by email.
Welcome to Dulux Professional
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Registration complete
Successfully registered, please login
Delete Account
Solventbased Alkyd M1000 Gloss
-
High gloss and excellent gloss retention
-
Good brush loading and good sag resistance
-
Excellent colour fastness
-
No added Lead and Mercury
-
Excellent colour fastness
-
Excellent durability and fungus resistance
-
Certified with Malaysian Standards MS 125:1995
-
Finish Gloss
-
Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the Wood or Metal surface. A guide to the theoretical coverage which can be achieved under normal conditions is 16-18 m 2 /litre.
-
Excellent exterior durability and colour fastness.
-
Mould and Fungus resistant.
-
Low odour, Low VOC
Product Description
primed metal and wood surfaces. It delivers a smooth finishing of continuous film in
wide selection of colours.
Technical & Safety Documentation
Colour Range
Tips & Advice
-
1. Preparing the SurfacesSurfaces generally must be clean, dry, free from all defective or poorly adhering
material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly
rubbed down using a suitable abrasive paper or wire-brushed to remove millscales
and rust, and then dusted off. -
2. CleaningClean all equipment with Dulux Thinner or white spirit immediately after use
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job
Solventbased Alkyd M1000 Gloss
Save to My Workspace