Weathershield Express

Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Conforms to SS 345 Specification for algae resistant emulsion paint for decorative purposes
  • Allows user to skip sealer application, speeding up the painting task
  • Keep Cool™ heat reflective technology - reflects solar heat and reduces exterior surface temperature by up to 5°C
Technical Information
  • Finish Sheen Finish
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 9 - 11 m2 /litre.
Product Features
  • Paint without applying sealer
  • Keep Cool™ Tech- Reflects solar heat, lowers exterior temp by 5°C. Save 10% on home cooling energy

Product Description

Dulux Professional Weathershield™ Express is a premium quality, acrylic waterbased emulsion paint specially formulated to give superior all-weather protection
and durability to exterior walls. Just two coats of Dulux Professional
Weathershield™ Express is required to obtain similar results as the usual 3 coats
system, hence reducing labour time and paint wastage, and eventually, cost and
speeding up the working process.

Technical & Safety Documentation

Colour Range

CP5 Colour Palette (Painter) SESA, Colour Futures TM 2024 (Painter) SESA

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering
    material, dirt, grease or wax. Remove all loose or defective paint or powdery
    residues by thorough brushing and scraping, using a stiff fiber brush and high
    pressure water jet. Treat any areas affected mould, lichens, algae and moss with
    Dulux Professional Fungicidal Wash. Repair any surface defects with an
    appropriate filler. Surfaces that remain powdery, friable or chalky after thorough
    preparation should be sealed with one coat of an appropriate Sealer (see below
    System Recommendation). Do not paint if the wall is saturated with dampness.
    (Protimeter reading higher than 16%). Allow excess moisture to evaporate.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
Fetching the data, please wait...