Weathershield Sealer E1000

Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • High performance water-based alkali resisting sealer.
  • Minimizes the risk of efflorescence
Technical Information
  • Finish Sheen Finish
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 8-10 m 2 /litre.
Product Features
  • High performance alkali resisting sealer
  • Efflorescence resistant

Product Description

Dulux Professional Weathershield™ Sealer E1000 is a superior quality acrylic
water-based alkali-resisting sealer for both exterior and interior masonry
surfaces. It is a certified green label product.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly
    adhering material, dirt, grease or wax. Remove all loose or defective paint or
    powdery residues by thorough brushing and scraping, using a stiff fiber brush
    and high pressure water jet. Treat any areas affected mould, lichens, algae
    and moss with Dulux Professional Fungicidal Wash. Repair any surface
    defects with an appropriate filler. Surfaces that remain powdery, friable or
    chalky after thorough preparation should be sealed with one coat of an
    appropriate Sealer (see below System Recommendation). Do not paint if the
    wall is saturated with dampness. (Protimeter reading higher than 16%). Allow
    excess moisture to evaporate.
Fetching the data, please wait...